Machine-Compatible Quick Couplings
Sandvik Hydraulic Quick Couplers
Source the right quick-disconnect couplings for Sandvik machines — attachment lines, implement outlets and service replacements.
Sandvik Machines and Their Hydraulic Quick Couplings
Sandvik builds mining and rock-excavation equipment — drills, crushers, loaders and underground machines. Sandvik mining equipment runs high-pressure hydraulic circuits that commonly use flat-face (ISO 16028 style) or heavy-duty ISO 7241 ball-lock couplings; pressure ratings matter more than on standard mobile gear.
Coupling Profiles You Will Find on Sandvik Equipment
The table below summarises the quick-coupling profiles most commonly used across Sandvik machine families. It is a field guide, not a guarantee: verify the profile on your specific machine before ordering.
| Machine family | Common profile | Typical sizes | Typical threads |
|---|---|---|---|
| Drilling rigs | Flat-face (ISO 16028 style) | 1/2" - 3/4" | ORFS / metric |
| Loaders / underground machines | Ball-lock ISO 7241 | 1/2" - 1" | ORFS / NPT |
| Service lines | Ball-lock ISO 7241 | 1/2" - 1" | ORFS / NPT |
Selection Notes for Sandvik Fleets
- Sandvik mining equipment runs high-pressure circuits — match the coupling pressure rating, not just the profile.
- Drilling rigs commonly use flat-face couplings for low-spill connection.
- Threads are often ORFS or metric on mining equipment; confirm per machine.
Replacement and Service Guidance
For Sandvik machines, provide the pressure rating of the circuit with the coupling request — mining circuits exceed standard mobile ratings, and the coupling must be specified accordingly.
FAQ
What couplings do Sandvik machines use?
Sandvik mining equipment uses flat-face (ISO 16028 style) on drills and ISO 7241 ball-lock on loaders — always confirm pressure rating.
Do Sandvik machines use special couplings?
Profiles are standard, but the pressure rating must match the mining circuit — specify pressure when ordering.
What threads on Sandvik equipment?
ORFS and metric threads are common on mining equipment; confirm per machine.
Need Couplings for Sandvik Machines?
Send the machine model, coupling profile or a photo — we confirm the match within 24 hours.